导读:饮水管道的防腐工作十分严格 ,不得有任何的重金属物质,以及颜料有有害的含量。生产部门对食品级管道内壁要求十分严格,用于饮用水管道内壁防腐的产品必须要达到食品及涂料生产双方权威要求。所以在内壁涂装的时候也要十分规范。
Takeaway: drinking water pipeline corrosion protection work is very strict, can not have any heavy metal material, and the pigment content of poisonous and harmful. The production department is very strict with food grade pipeline wall, used for drinking water pipe wall corrosion products must meet the requirements of both food and coating production authority. So be very specification in inner wall coating.
水性饮水管道防腐涂料的管道方案
Drinking water pipeline anticorrosion coating of pipeline
一般需要与底、面漆配合使用,底漆为饮水容器防腐的铁红底漆 ,加上饮水容器防腐灰色面漆施工。严格按照厂家配比比例施工,第一道涂刷之后要静置24小时,再涂刷第二道。
Generally need to use together with bottom, paint, primer for water container corrosion iron red primer, plus water container corrosion gray paint construction. In strict accordance with the manufacturer proportioning ratio of construction, to stand for 24 hours after the first coating, followed by the name of the second.
水性饮水管道防腐涂料施工工艺
Drinking water pipeline anticorrosion coating construction technology
1、 被涂管道表面锈迹、污迹一定要清楚干净。不锈钢底材要进行抛丸打毛,增加基面附着力。
1, the coated pipe surface rust, stains must be clear and clean. Stainless steel substrate to be shot dozen hair, increase the base surface adhesion.
2、 水性饮水管道防腐涂料使用要按照规定比例稀释搅拌,熟化十分钟之后再投入使用。
2, water drinking water pipeline anticorrosion coating used to dilute stir in accordance with the relevant provisions, curing ten minutes before put into use.
3、 水性饮水管道防腐涂料可喷涂、刷涂、滚涂,若年度过大要用脱离子水稀释调整。
3, water drinking water pipeline corrosion coating spraying, brush, roller coating, if annual is too large to adjust diluted with deionized water.
4、 水性饮水管道防腐涂料试用期为8小时左右,时间过长容易出现焦化现象,混配后要在低温下保存。
4, drinking water pipeline anticorrosion coating a probation period for eight hours or so, time is too long to appear coking phenomenon, mixed after preserved in low temperature. |